Plugged it in, and lo, blinky LED. Have since flashed with the EtherShield Drivers and its happily getting an IP address. now for some pachube / twitter / other integration...
Tuesday, 12 July 2011
nanode built!
One successful evening of soldering, and lo, I have a working nanode. Started off nice n basic with the resistors, but overall a pretty simple pcb to assemble:
Plugged it in, and lo, blinky LED. Have since flashed with the EtherShield Drivers and its happily getting an IP address. now for some pachube / twitter / other integration...
Plugged it in, and lo, blinky LED. Have since flashed with the EtherShield Drivers and its happily getting an IP address. now for some pachube / twitter / other integration...
Monday, 11 July 2011
Orange VoIP woes
Our livebox2 repeatedly used to lose the VoIP service (somewhat annoying as we don't have a 'physical' pots line, just ADSL signal on the copper pair)
however there's now a subtle hint on the config pages NOT to change the DNS servers from the automatic setting (we used to use opendns for content filtering)
So, anyone know what hard-coded voodoo sagem/orange were up to?
however there's now a subtle hint on the config pages NOT to change the DNS servers from the automatic setting (we used to use opendns for content filtering)
So, anyone know what hard-coded voodoo sagem/orange were up to?
Subscribe to:
Posts (Atom)
Thoughts on Statuspage.io integrations
$dayjob uses statuspage.io for our public status page . Although I've got some things automated, there's still a bunch of compon...
-
At home we have a small (2.5KW - 10*250w panels) PV system to try and offset our daytime electricity usage. This is connected to a 'Grow... -
During the trials of concerto at CERN, I wanted to make the text fields a bit more dynamic like say following a specific twitter feed. Thi...
-
'things that go bump in the tunnel' As I've beem following the LHC restart I've written a parser for the vistar status fee...